Cavity Units Doors

Spence Doors creates a variety of heavy duty cavity sliding door units for many different applications, including domestic and commercial. All frame profiles are manufactured to suit wall thickness and custom made to door sizes.

Spence Doors can build:

  • Timber frame and timber pocket
  • Metal frame and timber pocket
  • Metal frame and pocket

Technical Brochures:

Door Fitting

Hardware

Standard Units are designed to suit:

  • Clearance under the door of 20mm adjustable to 6mm
  • Direct mounting to finished floor surface.

Timber frame and pocket

Pressed metal frame and timber pocket

Press metal sliding door frame installed with a timber pocket for heavy duty unit that are easy to assemble

Pressed Metal Frame and Pocket

 

Installation Guide

Cavity frame unit will be supplied with:

  • Pressed metal frame designed for cavity units.
  • Assembled timber pocket.
  • Galvanized steel track with guide strips attached
  • Complete packet of fittings including rollers, bracket, guide fingers and fixing screws.
  • Excludes door, door furniture and architraves.

Standard Units are designed to suit:

  • Clearance under the door of 20mm adjustable to 6mm.
  • Direct mounting to finished floor surface.

Additional Information:

  • Fix the wall cladding with glue. Do not penetrate rails with nails.
  • Ensure the track is level and is resting on track platform.
  • Do not fix track inside cavity frame.
  • Do not remove ‘temporary’ spacing blocks until ready to insert door. It is easier to install and clad with spacing blocks in place.

The cavity clearances are at a minimum, only seasoned doors of good construction should be used to avoid scraping caused by door warping.