Metal Door Frames

Go back to the top

Fire Rated Frame Profiles - Stock Items 

• Frames are 1.6 mm zinc-coated steel.
• Rebate to suit doors 37 or 48mm thick rated doors.
• 41 Rebate in stock QLD only.

All Frames
Universal lock preparations and mortar guard.
Three heavy duty hinge plates and mortar guard.
Floor fixing plates
Standard single door sizes: 2040 x 620, 720, 820, 920, 1020
Standard double door sizes: 2040x1240, 1440, 1540, 1640, 1840

SD = Non Rated Frame profile
SDF = Fire Rated Frame Profile
SL = Sliding Pivot, Plain or MTI Frame Profile

Go back to the top 

Knock Down Frame 

All Spence Door Frames are supplied with fully engineered "Slot and Tab" corner connection methods. This ensures the highest level of accuracy and mechanical strength.
Frames can be site assembled or factory assembled where they are welded for additional strength, ground flush and primed to improve their aesthetic appearance.

 Go back to the top

Frame Assembling 

1. Frame parts slot together accurately and neatly.               2. Once slotted into place, knock lugs
                                                                                      down to secure frame, forming a strong
                                                                                      mechanical joint.

Frame Installation 

Standard Frame with Stud Bracket

This is the preferred method of concealed fixing of frames into dry wall applications where high traffic and additional strength is required.

Suitable for use in non-rated and fire rated stud wall configurations.

This is the preferred method of concealed fixing of frames into dry wall applications where high traffic and additional strength is required.

Suitable for use in non-rated and fire rated stud wall configurations.

Standard Frame with Stud Clip Fixing

This is a method of fixing knock down frames into dry wall applications.

Suitable for use in non-rated stud wall applications only. Stud clips can be supplied to suit 13mm and 10mm linings.

Steel or timber studs may be used

Standard Frame with Welded Stud Tags

This method allows frames to be installed before or after stud work is erected.

Suitable for use in non-rated and fire rated stud wall applications. Stud clips can be supplied to suit a range of different linings.
Steel or timber studs may be used

Standard Frame with Wire ties

5 Wire Ties per jam (10 for frame).
Suitable for use in non-rated and fire rated brick and block work walls.

For maximum strength and stability frames should be back filled.

Standard Frame with Dyna-bolt Tube Fixing

Back strap optional.
Recommended four 10mm countersunk dyna-bolts preparations per stile.
Suitable for use in non-rate and fire rated new concrete and previously existing walls.

Standard Frame with Strap for Precast Walls

Frame is inserted into cast before the wall is poured, resulting in a very strong frame.
Frame diameter to suit the wall thickness.
Suitable for use in non-rated and fire rated stud wall configurations.

Standard Frame with Dyna-bolt (holes only) for Precast Walls

Recommended four 10mm countersunk dyna-bolt preparations per stile.
Suitable for use in non-rate and fire rated new concrete and previously existing precast walls.

Standard Frame with Strap for Structual Beam

Frame is inserted into metal purlin wall and bolted in place.
Suitable for use in non-rated wall configurations.

Standard frame with Shadow Line

Offering a truly architectural finish to rendered or plaster wall finishes.
Able to be used on all Spence Doors standard frame range.

Standard Frame for fixing to Hebel Walls

Frames only available in custom dimensions to builders specifications.
Suitable for use in hebel and partition walls.
Steel or timber studs may be used.
This profile is custom built to suit varying walltypes.