| |
|
|
|
|
|
| |
|
|
|
|
|
| |
CAVITY UNITS |
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
Spence Doors creates a variety of
cavity units for many different applications:
• Heavy duty cavity sliding door units
• Designed for domestic, commercial and industrial applications.
• Frame profiles are manufactured to suit wall thickness.
• Custom made to doors sizes.
Spence Doors can build:
• Timber frame and timber pocket
• Metal frame and timber pocket
• Metal frame and pocket
|
|
|
Door Fitting
Hardware
Timber Frame and Pocket
Pressed Metal Frame and Timber
Pocket
Pressed Metal Frame and Pocket
Installation Guide
Technical Brochures
:
Metal Cavity
Unit.pdf
Timber Cavity
Unit.pdf
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DOOR FITTING |
|
|
|
|
|
 |
|
|
|
|
|
Return to the top
|
|
|
|
|
|
|
|
|
|
|
|
HARDWARE |
|
|
|
|
|
  |
|
|
Joey Twin
Track
Joey
Carrier
Steel
Track
2 Nylon Wheels
Galvanised
Quiet operation
Carries
90kg |
|
|
|
|
|
Standard Units are designed to
suit:
- Clearance under the door of 20mm adjustable to
6mm
- Direct mounting to finished floor
surface.
|
|
|
Return to the top
|
|
|
|
|
|
|
|
|
|
|
|
TIMBER FRAME and POCKET |
|
|
|
|
|
 |
|
|
|
|
|
Return to the top
|
|
|
|
|
|
|
|
|
|
|
|
PRESSED METAL FRAME and TIMBER POCKET
|
|
|
|
|
|
 
|
|
|
|
|
|
Press metal sliding door frame
installed with a timber pocket for heavy duty unit that are easy to assemble |
|
|
|
|
|
|
|
|
|
|
|
Return to the top
|
|
|
|
|
|
|
|
|
|
|
|
PRESSED METAL FRAME and POCKET
|
|
|
|
|
|
 |
|
|
 |
|
|
|
|
|
Return to the top
|
|
|
|
|
|
|
|
|
|
|
|
INSTALLATION GUIDE
|
|
|
|
|
|
Cavity Frame Unit will be supplied
with: |
|
|
|
|
|
- Pressed metal frame designed for cavity
units.
- Assembled timber
pocket.
- Galvanized steel track with guide strips
attached
- Complete packet of fittings including
rollers, bracket, guide fingers and fixing
screws.
- Excludes door, door furniture and
architraves.
|
|
|
 |
|
|
|
|
|
Standard Units are desgined to
suit:
- Clearance under the door of 20mm
adjustable to 6mm.
- Direct mounting to finished floor
surface.
IMPORTANT
-
Fix the wall cladding with glue. Do
not penetrate rails with nails.
-
Ensure the track is level and is
resting on track platform.
-
Do not fix track inside cavity
frame.
-
Do not remove ‘temporary’ spacing
blocks until ready to insert door. It is easier to install and clad with spacing blocks in
place.
-
The cavity clearances are at a
minimum, only seasoned doors of good construction should be used to avoid
scraping caused by door warping.
|
|
|
|
|
|
  |
|
|
TIMBER
FINISH
METAL FINISH |
|
|
|
|
|
Return to the top
|
|
|
|
|
