Cavity Unit Banner Pic
         
         
  CAVITY UNITS      
         
         
 

Spence Doors creates a variety of cavity units for many different applications:
• Heavy duty cavity sliding door units
• Designed for domestic, commercial and industrial applications.
• Frame profiles are manufactured to suit wall thickness.
• Custom made to doors sizes.

Spence Doors can build:
• Timber frame and timber pocket
• Metal frame and timber pocket
• Metal frame and pocket
 

 

Door Fitting
Hardware
Timber Frame and Pocket
Pressed Metal Frame and Timber Pocket
Pressed Metal Frame and Pocket
Installation Guide

Technical Brochures :
Metal Cavity Unit.pdf
Timber Cavity Unit.pdf

 
 
 
 
DOOR FITTING
 
DOOR FITTING
 

Return to the top

 
 
 
HARDWARE
 
Hardware 1          Hardware 2
Joey Twin Track                                     Joey Carrier
Steel Track                                              2 Nylon Wheels
Galvanised
                                               Quiet operation
                                                                    Carries 90kg
 

 Standard Units are designed to suit:

  • Clearance under the door of 20mm adjustable to 6mm
  • Direct mounting to finished floor surface.

Return to the top

 
 
 
TIMBER FRAME and POCKET
 
TIMBER FRAME and POCKET
 

Return to the top

 
 
 

PRESSED METAL FRAME and TIMBER POCKET

 

PRESSED METAL FRAME and TIMBER POCKET 0PRESSED METAL FRAME and TIMBER POCKET 1

 
Press metal sliding door frame installed with a timber pocket for heavy duty unit that are easy to assemble
 

PRESSED METAL FRAME and TIMBER POCKET 3

PRESSED METAL FRAME and TIMBER POCKET 4

 

Return to the top

 
 
 

PRESSED METAL FRAME and POCKET

 
PRESSED METAL FRAME and POCKET 1
PRESSED METAL FRAME and POCKET 2
 

Return to the top

 
 
 

INSTALLATION GUIDE

 
Cavity Frame Unit will be supplied with:
 
  • Pressed metal frame designed for cavity units.
  • Assembled timber pocket.
  • Galvanized steel track with guide strips attached
  • Complete packet of fittings including rollers, bracket, guide fingers and fixing screws.
  • Excludes door, door furniture and architraves.
INSTALLATION GUIDE
 

Standard Units are desgined to suit:

  • Clearance under the door of 20mm adjustable to 6mm.
  • Direct mounting to finished floor surface.

IMPORTANT

  • Fix the wall cladding with glue. Do not penetrate rails with nails.
  • Ensure the track is level and is resting on track platform.
  • Do not fix track inside cavity frame.
  • Do not remove ‘temporary’ spacing blocks until ready to insert door. It is easier to install and clad with spacing blocks in place.
  • The cavity clearances are at a minimum, only seasoned doors of good construction should be used to avoid scraping caused by door warping.
 
TIMBER FINISHMETAl FINISH
                      TIMBER FINISH                                             METAL FINISH
 

Return to the top